Radwag PM-60.05.C32 Precision Balance


In stock


Old Product Code: PM-60.05.C32 New Product Code: WL-223-0009

PM series balances are equipped with an innovative measuring system based on radwag monoblock technology. Use of the new measuring system, which is a subject matter of radwag patent, guarantees stability of repeatability over time at a range. The unique measuring system solution is characterized with great resistance to ambient conditions change. An in-built 4-point protection system prevents balance overloading, this ensures safety in case too heavy load is applied onto the weighing pan.

Features and Benefits

  • Unrivalled repeatability of indications.
  • Weighing of heavy loads with maximum accuracy.
  • Fast mass measurements.
  • New RADWAG MonoBLOCK sensor.
  • Robust mechanical design – new lower weighing platform.
  • Improved ergonomics – two types of weighing terminal for selection.


  • Labeling: Marking products with the right symbols contributes to quick and reliable identification. The balance/scale usually transfers product mass or product quantity to the label printer. The transferred value is printed with the following information: bar code, pictogram, content, address etc. In laboratory the labeling is performed in a semi-automatic mode, for industry in an automatic one (dynamic scales).
  • Plus/Minus Control: Control of sample’s mass carried out with reference to specified MIN and MAX thresholds. The weight is considered to be correct if it is comprised within threshold values. A graphic visualization of weighing result is displayed in a form of a bar graph.
  • Percent Weighing: Percent Weighing function is used for comparison of measured products with mass standard. Mass of a mass standard may be a numeric value taken from a database or it may be determined through a measurement process. Each measured product is compared to mass standard, mass of which is presumed as a model 100% ideal mass. For products weighing less than the mass standard, obtained results are lower than 100%, for products weighing more, the obtained results are greatly exceeded.
  • Parts Counting: Function using mass measurement for determination of measured items quantity. Mass of a single item is required for this process. It may be either estimated through weighment or taken from a database. For items counting the following algorithm is used: all items mass/single item mass = quantity. Function operation is supported by a mechanism of Automatic Correction of Accuracy. This allows to update single item mass in course of the process. To a certain extend Automatic Correction of Accuracy eliminates error which may be a result of different mass values of seemingly alike single elements. For industry solutions items counting may be simultaneously carried out with Checkweighing and dosing thus industry solutions feature audio signaling base informing that specified number of items has been weighed. It is possible to apply weighing systems using few platforms of different MAX capacities and different accuracies.
  • Statistics: Statistics function registers and analyses performed measurements. This supplies the user with the following information: Max and Min standard deviation, average value, variance, range et.
  • IR Sensors: Programmable function supporting the weighing process through control of the following options: sliding weighing chamber doors, printout, zeroing, tarring etc. Especially appreciated wherever preventing the balance from soiling is important.
  • Under Pan Weighing: The solution enables weighing with use of a stand, which is advisable for loads of non-standard shapes and dimensions and those that generate magnetic field.
  • GLP Procedures: Diagnostic function allowing to objectively document performed measurements. GLP procedures may be either presented in a short report form or extended one.
  • ALIBI Memory: ‘ALIBI’ memory enables saving and storing up to 100000 measurements. Measurements are saved automatically upon each pressing of the key. There is no need for any additional operations or changing settings. The following data related with the measurements is saved: measurement date, measurement time, result (mass), tare value, operator carrying out the measurement (logged in), product name. The software saves the measurement in a so called loop, i.e. when the measurement no. 100001 is saved, the measurement 1 gets automatically deleted from the memory. Measurements saved to balance memory cannot be deleted.
  • You can preview and print out the data saved to the ALIBI database.

Technical Specifications

  • Maximum capacity [Max]: 60kg
  • Readability [d]: 0.5g
  • Tare range: -60kg
  • Minimum weight (USP): 410g
  • Minimum weight (U=1%,k=2): 41g
  • Repeatability (Max): 0.4g
  • Repeatability (5% Max): 0.2g
  • Linearity: ±1.5g
  • Stabilization time: 3s
  • Adjustment: Internal (Automatic)
  • Display: 5′ graphic color
  • Communication interface: 2ЧRS232, USB-A, USB-B, Ethernet, Wi-Fi
  • Power supply: 100 ч 240V AC50/60Hz
  • Power consumption max.: 0.5A
  • Operating temperature: +10 ч +40°C
  • Weighing pan dimensions: 400 x 500mm
  • Packaging dimensions: 700 x 600 x 200mm
  • Net weight/Gross weight: 17kg/19kg

Warranty Information:

  • 2-Year Warranty

See It Styled On Instagram

    No access token

Main Menu